Fsck
FSCK stands for File System ChecK, and does exactly that, checks a filesystem! This is one of the many beauties of Linux, in that most of the time, you can figure out what a command does by it's name, though that's definitely NOT always the case!
As there are many types of file systems on many operating systems, including Linux, there are many variations of fsck to support many different filesystems types, and a quick way to see which files systems are supported by the current Linux system you happen to be logged into right now, by typing this(note the DOT after "fsck."!) and then tapping the TAB key twice:
[jamie@fc33hw01.dawgland.com:~]$ fsck. fsck.btrfs fsck.exfat fsck.ext3 fsck.fat fsck.msdos fsck.vfat fsck.cramfs fsck.ext2 fsck.ext4 fsck.minix fsck.ntfs fsck.xfs [jamie@fc33hw01.dawgland.com:~]$ fsck.
As you can see, not only do my particular fsck packages installed support the most common and current Linux filesystems, EXT2, EXT3, EXT4, BTRFS and XFS.
Also, as you can see, Microsoft filesystems MSDOS, FAT, VFAT and NTFS are supported as well.
HFS is short for Hierarchical File System, and is used on MAC's.
CramFS is mostly used on embedded systems & Minix is used on the Minix operating system, and designed to be more UNIX-like.
Each fsck command has different switches and arguments. To see how to use a particular fsck tool, just type the entire fsck.xxx command by itself and hit the ENTER key, and it should give you the "Usage" page.
For instance, if you want to find out how to use the EXT4 filesystem, just type the command on a blank line without any arguments or switches:
[jamie@fc33hw01.dawgland.com:~]$ fsck.ext4
This should produce the following usage output:
Usage: fsck.ext4 [-panyrcdfktvDFV] [-b superblock] [-B blocksize] [-l|-L bad_blocks_file] [-C fd] [-j external_journal] [-E extended-options] [-z undo_file] device Emergency help: -p Automatic repair (no questions) -n Make no changes to the filesystem -y Assume "yes" to all questions -c Check for bad blocks and add them to the badblock list -f Force checking even if filesystem is marked clean -v Be verbose -b superblock Use alternative superblock -B blocksize Force blocksize when looking for superblock -j external_journal Set location of the external journal -l bad_blocks_file Add to badblocks list -L bad_blocks_file Set badblocks list -z undo_file Create an undo file [jamie@fc33hw01.dawgland.com:~]$
Other fsck tools point you to a different location to get the usage page. For instance, here is what the fsck.btrfs command on a blank line by itself does:
[jamie@fc33hw01.dawgland.com:~]$ fsck.btrfs If you wish to check the consistency of a BTRFS filesystem or repair a damaged filesystem, see btrfs(8) subcommand 'check'. [jamie@fc33hw01.dawgland.com:~]$
The above hint indicating to see the 'check' subcommand tells me to type this command to get the usage for fsck.btrfs. I always try "--help" without the quotes to look for built-in help in most every command-line tool:
[jamie@fc33hw01.dawgland.com:~]$ btrfs check --help
Which produces the following usage output I am looking for:
[jamie@fc33hw01.dawgland.com:~]$ btrfs check --help
usage: btrfs check [options] <device>
Check structural integrity of a filesystem (unmounted).
Check structural integrity of an unmounted filesystem. Verify internal
trees' consistency and item connectivity. In the repair mode try to
fix the problems found.
WARNING: the repair mode is considered dangerous and should not be used
without prior analysis of problems found on the filesystem.
Options:
starting point selection:
-s|--super <superblock> use this superblock copy
-b|--backup use the first valid backup root copy
-r|--tree-root <bytenr> use the given bytenr for the tree root
--chunk-root <bytenr> use the given bytenr for the chunk tree root
operation modes:
--readonly run in read-only mode (default)
--repair try to repair the filesystem
--force skip mount checks, repair is not possible
--mode <MODE> allows choice of memory/IO trade-offs
where MODE is one of:
original - read inodes and extents to memory (requires
more memory, does less IO)
lowmem - try to use less memory but read blocks again
when needed (experimental)
repair options:
--init-csum-tree create a new CRC tree
--init-extent-tree create a new extent tree
--clear-space-cache v1|v2 clear space cache for v1 or v2
--clear-ino-cache clear ino cache leftover items
check and reporting options:
--check-data-csum verify checksums of data blocks
-Q|--qgroup-report print a report on qgroup consistency
-E|--subvol-extents <subvolid>
print subvolume extents and sharing state
-p|--progress indicate progress
[jamie@fc33hw01.dawgland.com:~]$
My other favorite file system, especially on servers with huge files, is the XFS filesystem, and the fsck.xfs command on a blank line by itself with no switches or arguments produces this:
[jamie@fc33hw01.dawgland.com:~]$ fsck.xfs If you wish to check the consistency of an XFS filesystem or repair a damaged filesystem, see xfs_repair(8). [jamie@fc33hw01.dawgland.com:~]$
So, when I then type the command "xfs_repair"(NOTE the required under_score in the command name!) without the quotes on a blank line without any switches or arguments, I get the following output:
[jamie@fc33hw01.dawgland.com:~]$ xfs_repair
Usage: xfs_repair [options] device
Options:
-f The device is a file
-L Force log zeroing. Do this as a last resort.
-l logdev Specifies the device where the external log resides.
-m maxmem Maximum amount of memory to be used in megabytes.
-n No modify mode, just checks the filesystem for damage.
(Cannot be used together with -e.)
-P Disables prefetching.
-r rtdev Specifies the device where the realtime section resides.
-v Verbose output.
-c subopts Change filesystem parameters - use xfs_admin.
-o subopts Override default behaviour, refer to man page.
-t interval Reporting interval in seconds.
-d Repair dangerously.
-e Exit with a non-zero code if any errors were repaired.
(Cannot be used together with -n.)
-V Reports version and exits.
[jamie@fc33hw01.dawgland.com:~]$
In the case of fsck.ntfs, the fsck tool for NTFS filesystems, there is no help, and typing "fsck.ntfs" without the quotes on a blank line without any switches or arguments produces no output at all! However, upon further examination, we find that "fsck.ntfs" is just a pointer, what in Linux is known as a "Symlink", pointing to another command called "ntfsck". Using the Linux command/tool "which", we can find where this "Symlink" lives on the hard drive. If it were just a regular file, the "which" command also would show it's location:
[jamie@fc33hw01.dawgland.com:~]$ which fsck.ntfs /usr/sbin/fsck.ntfs [jamie@fc33hw01.dawgland.com:~]$ So, when I do a long file listing, to show all file attributes, you can see the actual symlink and where it points to: <pre style="color:blue"> [jamie@fc33hw01.dawgland.com:~]$ ls -l /usr/sbin/fsck.ntfs lrwxrwxrwx. 1 root root 13 Jul 28 2020 /usr/sbin/fsck.ntfs -> ../bin/ntfsck [jamie@fc33hw01.dawgland.com:~]$
So now, if I type ntfsck --help, I get this:
[jamie@fc33hw01.dawgland.com:~]$ ntfsck --help Failed to access '--help': No such file or directory Error opening partition device: No such file or directory [jamie@fc33hw01.dawgland.com:~]$ So, I see that I must specify an actual device, which is the partition containing the non-mounted NTFS filesystem. I can't stress enough how important it is to only run all of these tools on partitions that are NOT mounted. This usually means you have to reboot the computer with an alternate device such as a USB flash drive, or other bootable media which contains a "Live operating system" which includes the fsck tools we are referring to.